How do I use the pause, stop and resume commands in Display Studio

Topic

  • How do I use the stop and resume playlist commands in Display Studio?
  • How do I pause content while I cover it with something else?
  • What is the stop command for in Display Studio?
  • What is the difference between Stop and Pause in DMP-8000 Player Control?

Environment

  • Product Family: Software; Control System
  • Product: 
  • Components: Display Studio, Show Control 2.14.1.6+, DMP-8000
  • Control System: Show Control System (SCS)
If a playlist needs to be stopped for an alternate message, the stop and resume can be used so the playlist does not need to restart at the beginning.  Stop would be used in place of Pause; the difference in functionality being that, once resumed, the item that was stopped would start over at the beginning instead of where it was paused.

Steps

Creating a button to stop or pause a playlist or file

Create a new script button or edit an existing button.  For details, see: How to Create Scripting Containers and Buttons.

  1. Create a new script line.

    1. DMP-8000 Player Control or DMP-7000 Player Control
    2. Choose the zone(s) that the playlist is running on.
    3. Choose Stop OR Pause
      • Stop: starts at the beginning of the content when resumed, no matter where it was in playback when stopped
      • Pause: resumes at the exact place it was paused
    4. Save. 
See animation below: 
    1. Stop Playlist.gif

Create a button to resume the playlist or file

  1. Create a new script line.

    1. DMP-8000 Player Control or DMP-7000 Player Control
    2. Choose the zone(s) that the playlist is running on.
    3. Choose Resume.
    4. Save. 

When the playback of an item that was stopped and resumed is reported in Proof of Play in Venus Control Suite, it will show it as playing only a single time for it's actual duration. For example, a 15 second animation was stopped 3 seconds into playing via a playlist to play a prompt over top. It was resumed once the prompt was blanked. It started back at the top and finished playing it's full 15 seconds. In the report, it will show as playing 1 time for a duration of 15 seconds. If the graphic was paused instead of stopped, Proof of Play will not count the amount of time it was paused for; thus, reporting the duration of the file itself.

Related Resources

How do I use pause modes in Show Control with DMP-8000? 

KB ID: DD4064671


Fill out my online form.

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.