How to remotely update a custom translation table on a VFC, VC6, or VS6
Topic
- How to remotely update a custom translation table on a VFC,VS6, or VC6?
Environment
- Product Family: Vanguard
- Product: VC6, VF-Series, VM-Series, VX-Series, VS6
- Components: VFC
- Control System: Vanguard
Steps
- How to Locate Translation Table:https://daktronics.lightning.force.com/lightning/r/Knowledge__kav/ka06T0000017GrZQAU/view
- Login to VIP interface.
- Enter display IP + port 85 (e.g. XXX.XXX.XXX.XXX:85) in web browser.
- **NOTE: Must be connected to the Primary Ethernet port to access port 85 (VIP). It is not possible to access VIP at port 85 through Auxiliary Ethernet port.
- Select Configuration.
- Select Output.
- Click on Upload button beneath Translation Table.
- Browse to the location of the Translation Table (TT) and click Open button.
- After indicates upload of TT is complete close web page.
- Login to DMP web page (display controller IP) select car icon (ntcip).
- Login to Configuration menu and verify display is configured for correct size.
- Select Sign 1.
- Select Configuration.
- Select System.
- Select Required.
- Scroll down one and select Translation Table
- Option should be set to none or not automatic.
- Verify correct matrix size is listed along top, just beneath top line of "Required Display Configuration".
- Login to Configuration menu and verify display is configured for correct size.
KB ID: DD3709402
DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.
DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.
The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.