Daktronics

Display Studio How do I create a set dimming script for my Daktronics Show Control System

Topic

To manually adjust dimming during an event, it is recommended to create a scripting button with a Set Dimming script to set a display's dimming mode so that its brightness is appropriately adjusted for ambient light conditions.

  • How to create a set dimming script in Display Studio for VIP-4060s?
  • Show Control's Display Studio script buttons

Environment

  • Product: 
  • Components: Display Studio, DMP-8000, VIP-4060
  • Control System: Show Control System (SCS)
DisplayStudio-Logo_Blue.png

Steps

6000 Processor or VIP-5x60

DMP-8000 with VIP-4060:

  1. Choose System Control Script.
  2. Select Advanced System Script.
  3. Choose Set Dimming.
  4. Set the Custom ERTD.
    1.  Enter the Port # which is configured for the VIP-4060, usually 27000.
    2. Enter the Sign Number for the VIP-4060.

For DMP-7000 Displays:

  1. Choose DMP-7000 Display Control Script.
  2. Select the Sign(s) on which you want the dimming mode to be set.
  3. Place a checkmark in the checkbox(es) of the appropriate sign(s).
  4. Choose Set Dimming.
  5. Set Dimming settings as follows:

Select the radio button for Manual mode, and use the slider bar to set a value from 0 (full dimming, for low ambient light conditions) to 255 (no dimming, for high ambient light conditions).

See How to configure ERTD Dimming for a VIP 4060 for more details.

In the Set Dimming settings step, select the radio button for Manual dimming mode, and use the slider bar to set a value from 0 (full dimming, for low ambient light conditions) to 255 (no dimming, for high ambient light conditions).

The steps for creating a dimming script button for a DMP-8000 player is also illustrated below.

 

KB ID: 000002059

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.