DSTI: How to Setup Color RTD in DSTI and Show Control?

Topic

  • How do I setup color RTD to show on the display for baseball stats?
  • How do I change the color of the current batter (baseball)?

Environment

  • Product: DSTI, Content Studio
  • Component: DakStats Baseball, DSTI, DMP-8000, DMP-7000
  • Control System: Show Control System (SCS)

Steps

  1. Setup Color RTD in DSTI
    • Open DSTI, click Edit, click Configure Color RTD to bring up this window:
      color rtd.jpg
    • Click the current color (defaults to no color the first time,) so use the above picture to click in the correct location) to bring up the color selection window:
      color rtd2.jpg    
    • When you select a value in this window, the color that that particular RTD data will be set to that color. For example:
      color rtd4.jpg          
    • Select the color you want DSTI to output
      NOTE: This color is NOT going to be the final product! The color is just selected to differentiate between different types of RTD coming out of DSTI. Other RTD inputs can have separate colors. 
    • Click OK, and then OK again. Restart DSTI.

  2. Setup Content with Show Control and Content Studio
    • Open Content Studio via Display Studio
    • Place the RTD Fields that you need
      1.png
    • Select the RTD fields that you would like to be color RTD from DSTI. Specifically the field that you changed in the DSTI settings
    • With the RTD field selected, open the Field Properties tab in the Content Studio Ribbon
      Color RTD.png
    • In the ERTD section, place a check the Color checkbox 

Additional Resources
How to Setup Color RTD in DSTI and Venus 7000

Configuring Color RTD Mapping for DMP-8000 ver 6.4 or Higher

How to configure color RTD mapping for DMP-8000 in the web interface (For DMP-8000 version 7.00+)    

KB ID: DD3084380


Fill out my online form.

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.