How to create a set dimming script in Display Studio?

Question

To manually adjust dimming during an event, our training group recommends creating a scripting button with a Set Dimming script to set a display’s dimming mode so that its brightness is appropriately adjusted for ambient light conditions.

  • How to create a set dimming script in Display Studio?

Environment

  • Show Control System
  • DMP-7000
  • DMP-8000

Answer/Steps

For DMP-7000 Displays:

1. Choose DMP-7000 Display Control Script.

2.  Select the Sign(s) on which you want the dimming mode to be set.

Place a checkmark in the checkbox(es) of the appropriate sign(s).

3. Choose Set Dimming.

4. Set Dimming settings as follows:

Select the radio button for Manual mode, and use the slider bar to set a value from 0 (full dimming, for low ambient light conditions) to 255 (no dimming, for high ambient light conditions).

 

For DMP-8000 Displays:

1. Choose System Control Script.

2. Select Advanced System Script.

3. Choose Set Dimming.

4. Set the Custom ERTD.

a. Enter the Port # which is configured for the appropriate display.

b. Enter the Sign Number for the appropriate display.

5. In the Set Dimming settings step, select the radio button for Manual dimming mode, and use the slider bar to set a value from 0 (full dimming, for low ambient light conditions) to 255 (no dimming, for high ambient light conditions).

 

The steps for creating a dimming script button for a DMP-8000 player is also illustrated below.

 

KB ID: DD3360119


Fill out my online form.
DISCLAIMER: Use of this content may void the equipment warranty, please read this DISCLAIMER prior to performing any service of the equipment.