How do you add a door switch into the back of the VFC controller?

Topic

  • How do you add a door switch to a Vanguard Field Controller?

 

      Environment

      • Product Family: Transportation
      • Product: Vanguard
      • Components: Door Switch, VFC
      • Control System: VFC

      Steps

      The door switch wires need to be wired into the Digital I/O ports on the back of the VFC controller.

      Use pins 1 and 2 if wiring up a single door switch.

      1. Log into the VFC controller by hitting enter.
      2. Select 1 for Sign 1.
      3. Select 4 for configuration.
      4. Select 3 for Peripheral.
      5. Select 1 for Add.
      6. Select 2 for Advanced Setup.
      7. Arrow down twice.
      8. Select 3 for Add Door Monitoring.
      9. Select 1 for Door Switch.
      10. Select 2 for VIP 1.
      11. Enter in pin 1 (if door switch is using pin 1) then hit enter.
      12. The door switch can now be viewed in the peripherals.

      KB ID: DD4054713


      DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

      DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

      The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.