How to configure LIVEBOOK downstream switcher keying without program access?

Note: For software updates and creative content subscriptions, please log in to your AJT service portal

Question

  • How to configure LIVEBOOK downstream switcher Keying without Program Access?

Environment

  • Product Family: Software and Controllers
  • Product: SportApp
  • Component:  downstream keying without Program access
  • Control System: LIVEBOOK
This configuration allows you to monitor the appearance of the score bug only, without video, within the user interface.

Answer/Steps

Verify hardware connections: See: "How to configure AJT LiveBook system using a downstream key?"

  1. Open the Settings Dialog. See: "How do I configure the AJT SportApp?"
  2. In the Video section, click the Settings button to open the Video Settings dialog.
    sw10.jpg

    The Video Settings dialog appears.
  3. In the Graphics Output Mode area, to route the score bug and the video out for downstream keying at the switcher, select Key and Fill Out – Downstream.
  4. From the Reference dropdown, choose one of these:
    • Choose RefIn if you have a reference signal connected.
      sw14.jpg
    •  If you do not have a reference signal connected to your I/O Box, choose Internal.
      sw15.jpg
  5. Observe the checkbox next to the Reference dropdown. A green check next to this selection confirms that the system detects a valid signal. A red X indicates that no signal is detected from the selected source. In this case, check your hardware connections.
  6. Click OK to Save your settings and close this dialog.
  7. Complete the configuration process.vSee: "How do I configure the AJT SportApp?"

KB ID: DD3989716


Fill out my online form.
DISCLAIMER: Use of this content may void the equipment warranty, please read this DISCLAIMER prior to performing any service of the equipment.