Content Studio: How do I create an RSS feed?

Topic

  • RSS Feeds
  • Content editing tools

Environment

  • Product:
  • Component: Content Studio
  • Control System: Venus Control Suite Daktronics Hosted

Steps

The display needs to be compatible with data to utilize this feature. For information on display models and data, please see What displays and software are compatible with XML / RSS feeds? . Data opens a link to a data feed from an internet source.  Acceptable data feeds include time, temperature, RSS, or XML feeds. 

  1. Create Message in Content Studio with Feed Data configured in Venus Control Suite.
    1. Open Content Studio.
      1. While logged into VCS, click on Media.
      2. Click down arrow next to Upload.
      3. Select New Content Studio Presentation.
      4. Enter in username and password.
    2. Enable the Dynamic Data Library Plug-in if it hasn't been done so already.
      1. Click on the Venus Logo in upper left hand corner.
      2. Click on Content Studio Options.
      3. Select Plugins.
      4. Place a checkmark in Dynamic Data Library and click Ok.
    3. Choose the Feed Items you want to add to your content from the listing in the Dynamic Data Library and drag them into your layout.
      • rssfeed.jpg
    4. Adjust the size of your textbox based on how many characters you want to show. 
    5. Change formatting as desired.
    6. Click on the Venus logo in upper left hand corner.
    7. Click Save.
    8. Name the presentation.
    9. After saving, the content will upload directly to the Media Library.
Additional Information:
If setting up new feed all from Content Studio please follow: How do I create a feed in Content Studio?

KB ID: DD3367626


DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.