How to log into DI-6000 or VP-6000 using PuTTY

Question

  • How do I log onto a DI-6000 or VP-6000 using PuTTY program?

Environment

  • DI-6000
  • VP-6000

Answer/Steps

stopsign.jpgThe steps outlined, if performed incorrectly, may result in equipment failure. Do not attempt these steps without proper training and understanding of product operation. Consult a Daktronics support technician if you need assistance.
  1. Download PuTTY from Dakfiles here.
  2. Extract to a computer on the same network as the DI-6000 or VP-6000, a Venus Control Suite Computers is recommended.
  3. Run PuTTY.exe.
  4. Enter IP address of the DI-6000 or VP-6000 with Port 22 on log in screen, Click open.
    putty config.png
  5. Log in at the prompt. 

putty login(dakeng).png 

6.  Once you are logged in, you will see a prompt similar to this:
putty after login(dakeng).png 

 

KB ID: DD3282244


Fill out my online form.
DISCLAIMER: Use of this content may void the equipment warranty, please read this DISCLAIMER prior to performing any service of the equipment.