How to configure settings for a Biamp Audia EXPI/O-2 I/O Expander


  • How do I configure settings for a Biamp Audia EXPI/O-2 Inputter/Output Expander?


  • Biamp Audia EXPI/O-2 Input/Output Expander
  • Sportsound 500HD, 1500HD, 2000HD



stopsign.jpgThe steps outlined, if performed incorrectly, may result in equipment failure. Do not attempt these steps without proper training and understanding of product operation. Consult a Daktronics support technician if you need assistance.
  • Biamp settings can be configured using the LCD monitor and the control knob on the front panel of the the device.
    1. Ensure power is present to the Biamp (possibly on power strip).
    2. Press the control knob to enter setup.
    3. Edit settings to match the list of settings below. Use the control knob to switch to the next setting.
    4. If prompted for confirmation when making a change, use the control knob to select "OK" or "Cancel" and press the control knob to select option.
  • Biamp Settings (Should be set to exactly what is shown below):
    1. BUNDLE # TX = 00001 (Set to 00000 by default)
    2. BUNDLE # RX = 00000 (default setting)
    3. COBRANET LATENCY = 5.33ms (Default setting varies)
    4. INPUT GAIN CH1 & CH2 = +12dBu (Set to 0dbu by default)
    5. PHANTOM POWER = OFF (Default setting)
    6. OUTPUT GAIN CH1 & CH2 = 0dBu (Default setting)
    7. PASSWORD PROTECT = UNLOCK (Default setting)
    8. TITLE DISPLAY = AUDIA EXPI/O-2 (Default setting)

KB ID: DD2909756

Fill out my online form.
DISCLAIMER: Use of this content may void the equipment warranty, please read this DISCLAIMER prior to performing any service of the equipment.