Clocks/Scoreboards sharing one handheld but are not operating as a pair; Both set as servers

Potential Symptoms

  • Two Delay of Game(DOG) or play clocks both running off of one wireless RC-100 or RC-200 , one working and the other one is not.
  • Only one DOG clock works correctly all the time, but the other DOG clock does not work at all or only randomly.
  • When powering down the working DOG clock the other DOG clock starts working.
  • One timer or scoreboard works, other does not.
  • When functional scoreboard powers off, non-functioning scoreboard begins responding to RC-100 commands.
  • Only one clock or scoreboard will respond to RC-100 or RC-200 at a time. 

Environment

  • Product Family: Sports Product
  • Product: DOG or Play Clocks, TI-2003
  • Component: RC-100 Base Station, RC-200 Base Station
  • Control System: RC-100 Handheld , RC-200 Handheld

    Cause

    • Both wireless base station receivers are set in server mode by default. For two base stations to work with one RC-100 or RC-200, one needs to be set to server mode and the other needs to be set to client mode.

    Resolution

    1. Make sure one base station is set in "Server" operation (normal operation) via the "X1" jumper and other base station to be jumped for "Client" operation so that it receives signal from the other clocks base station.
    2. Use Code 05 and insert LL-2653 on RC-100.

    KB ID: DD2390315


    DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

    DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

    The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.