All Sport 1600: How to set up a pace clock to count up indefinitely?

Potential Symptoms

Use an All Sport 1600 to set up a count up clock that continuously counts up from 0 seconds to one hour

Environment

  • All Sport 1600 (wired or wireless) with the "Segment Timer" insert
  • PC-2001/PC-2002, TI-2019

Resolution

Note: All commands are entered into the All Sport.
  1. Turn the pace clocks on. Ensure the radio switch on all clocks is also turned on (if using wireless).
  2. Turn on the All Sport 1600 wireless console. The All Sport console should override the program currently running on the pace clock.
  3. Enter code 06. Press ENTER.
  4. If you are using a wired console, skip to step 5.  If using a wireless console:
    1. When prompted, press CLEAR to edit the broadcast and channel settings.
    2. Enter broadcast group number and press ENTER. Then, enter channel number and press ENTER.
  5. Press CLEAR/ALT, then press SET TIME/UP/DOWN.
  6. Press 1 to select "Up."
  7. Press AUTO STOP.
  8. Press 2 to select "No."
  9. Press 2 to select "No" again.
  10. Press AUTO HORN.
  11. Press 2 to select "No."
  12. Press FIRST/LAST SEG.
  13. Press 1 to select segment 1 for the first segment.
  14. Press ENTER to drop down to the Last segment.
  15. Press 1 to select segment 1 for the last segment.
  16. Press ENTER to go back to the main screen.
  17. Press START to start the clock.

KB ID: DD2240557


DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.