How to configure a new or replacement DMP player for a Venus Control Suite controlled DB-6500, DB-6600, or BLD-0200

Topic

  • How do I configure a new or replacement DMP player for a Venus Control Suite controlled DB-6500, DB-6600, or BLD-0200?

Environment

  • Product Family: Billboard
  • Product: DB-6500, DB-6600, BLD-0200
  • Components: DMP-8000 p/n 0A-1987-0011, 0A-2285-0011
  • Control System:

Steps

NOTE:  This guide is for use by Technicians or Installers in the field.  

NOTE:  This guide is applicable to displays using Venus Control Suite.

NOTE:  Recommended tools to complete this work include: laptop, spare Ethernet cable, Ethernet coupler (RJ45 female-to-female).

  1. Setup laptop for direct (static IP) connection to devices.
  2. Directly plug the Ethernet cable from the DMP to your laptop.
    • This should be the cable that is currently plugged into port 3 of the Meraki router.
      • NOTE:  It is recommended to connect an Ethernet coupler to this cable and use a spare Ethernet cable to extend its reach so you can complete this work in a comfortable and safe position.  Alternatively, if the DMP is easily accessible, you may disconnect the existing cable and plug your spare cable directly into it from your laptop.
  3. Login to the DMP.
    1. Open a web browser window.
    2. Enter the DMP IP address into the address bar (default "http://192.168.0.111:81").
  4. Identification:

     

    1. Click the Configuration menu button.
    2. Ensure the Identification tab is selected.
    3. Update the Description box with the site specific name and number followed by "DMP".
      • This information is logged in the case as the site "Description" for you reference.
    4. Click Save.
    5. Enter the player's username and password if prompted.
      129f.jpg
  5. Time Zone:

     

    1. Select the Time tab.
    2. Select the site specific time zone from the dropdown menu.
    3. Click Save.
      141f.jpg
  6. Services:
    1. Select the Services tab.
    2. Select the dropdown arrow next to Media Management Server and select Venus.
    3. Click Save.
      201f.jpg
  7. Plug the network cable for the DMP back into its original position.
  8. Contact Daktronics Technical Support at 1-800-DAKTRONICS to have the new device registered.

KB ID: DD4627909


DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.