How do I configure color RTD mapping for DMP-8000 with Silverlight interface

Topic

How do I configure color RTD Mapping for DMP-8000 with the Silverlight interface?

Environment

Product Family: Control System
Product: DMP-8000 (VNET) version 6.4-7.0 DSTI
Components: Color RTD (Real Time Data) Mapping Configuration via the Silverlight interface
Control System: Baseball, Motor Sports, NHL (see What Daktronics RTD Streams Offer Color RTD?, DD3082377)

For DMP-8000 version 7.00+, see How to configure color RTD mapping for DMP-8000 in the web interface.

Steps

Log in to the web interface of the DMP 8000 you will be using for color RTD.
Navigate to the Advanced Tab and then select the Configuration Tab.
Once in the configuration tab, scroll down until you reach the configuration section labeled RTD.
Click the green + next to RTD and then select Color Maps.
Click the green + next to Color Maps and then select Color Map.
In the "From" section, fill in the Venus Value provided from DSTI into the Red, Green, Blue fields for the color you will be changing the RTD information from.
In the "To" section, enter the hex value of the color you want to be displayed for Color RTD. You will want to add an additional FF to the beginning of your hex value to account for transparency values.

Note: You will have to type the hex value in notepad and copy/paste it into the space as the UX does not allow capital letters to be manually input.

Once the values have been properly set, send the configuration changes to save them.

Note: For additional help setting up the DMP-7000 or Show Control for Color RTD, please see How to Setup Color RTD in DSTI and Show Control?, DD3084380 and How to setup and use Color RTD in DSTI and Venus 7000, DD2214243.

KB ID: DD3027733

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

Read the Full Disclaimer

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.