OmniSport Pro Swimming will not connect to ENet OmniSport 2000

Potential Symptoms

  • Pro Swimming will not communicate with the Ethernet OmniSport 2000 timing console

Environment

  • ENet OmniSport 2000 Timer
  • OmniSport Pro Swimming version 3.0 or higher
  • Hy-Tek Swim Meet Manager version

Cause

  • Pro Swimming computer has the wireless network adapter set as the top priority.

Resolution

  1. Open your network connections by typing ncpa.cpl into the start menu search bar and hitting enter on your keyboard.ncpa dot cpl.jpg
     
  2. A network connection prompt should open up.
    **Select advanced settings from the tool bar. **If your tool bar is not showing up hit F10 or ALT on your keyboard, you will need to do this for Windows 7.**ncpa advanced settings.jpg
    1. An Advanced Settings window will pop up. Under the Adapters and Bindings tab move the Local Area Connection to the highest priority or the top of the list.
      ncpa adapters and bindings.jpg
       
  3. Select OK and your Local Area Connection adapter should now take highest priority.
  4. The OmniSport Pro Swimming computer should now connect to the OmniSport 2000 timer via wired network communication.

KB ID: DD2635125


DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.