Venus 1500: How do I find/change the IP address in the v4 software?

Topic

  • How do I find/change or edit the IP address in the Venus 1500 v4 software?
  • How do I find/change or edit the Display DHCP name in the Venus 1500 V4 software? 

Environment

  • Product:
  • Component: Ethernet
  • Control System: Venus 1500 Version 4

Steps


The following instructions will show you where the IP address is located within the Venus 1500 v4 Software and/or how to change the current IP Address:
  1. Launch Venus 1500 v4.
  2. Click the Orange V Application menu button (Upper left hand corner of the Venus software).
  3. Go to Configure -> Displays.
  4. Select the display you want to change or find the IP Address for.
  5. Click Edit.
  6. Click Continue.
    • You should see Ethernet Communication Selected.
    • If not selected, this means the display is not setup for Ethernet Communication.
  7. Click Continue again.
  8. You can now view the current IP address/DHCP name, or you can type in the new or correct IP Address/DHCP name if needed. 
  9. Click Continue through the rest of the prompts.
  10. Click Finish.
  11. Close out of the Display Management window.
  12. From the center Drop-down menu Select a Display, reselect the display to attempt connection to display.
Reference How do I change a static IP address on a Galaxy display?  if you need to change the IP Address on the physical display.


Alternatively, learn more about Venus Control Suite to enhance your control software experience.

KB ID: DD2271372


DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.