How do I perform a loopback test using HyperTerminal to test a serial communication system?

Potential Symptoms

How do you perform a loopback test using HyperTerminal to test a serial communication system?

Environment

  • Product Family: Message Displays
  • Product:
  • Component: HyperTerminal, Windows XP, Serial Communication
  • Control System:

Resolution

  1. Open HyperTerminal by going to start -> All programs -> Accessories -> Communications -> HyperTerminal.
  2. Create a connection name and click OK.
  3. Click the drop down next to "Connect using:" and select the appropriate com port, click OK.
  4. Port settings can be left on default with the exception of "Flow control:" click the drop down and set this option to None, click OK.
  5. Setup the loopback within the system and type a message using the computer's keyboard.
    • If you are able to see what you are typing, the loopback is passing.
    • If the box remains blank, the loopback has failed.

Additional Note

  • If using a Lantronix box, follow the above steps, except choose "TCP/IP (Winsock)" for connect using and enter the box's IP address for the "Host address:" line and 3001 for the "Port number:" line

KB ID: DD1994747


DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.