No boot sequence is showing GP4 display after being powered on but it will show a heartbeat

​​​​Symptoms

  • No boot sequence is showing GP4 display after being powered on but it will show a heartbeat.

Environment

  • DMP-8065, DMP-8065.2, GP4 display

Cause

  • Boot sequence for DMP-8000 is set none.

Resolution

  1. ​​Connect to display web interface.
  2. Set boot sequence to Full as per screenshot below.
boot sequence.jpg
 

KB ID: DD3598988


Fill out my online form.
DISCLAIMER: Use of this content may void the equipment warranty, please read this DISCLAIMER prior to performing any service of the equipment.