How to Replace Casters on ST-2100/ ST-2333 Scorer Tables

Question

  • How do I replace the casters on ST-2100/ ST-2333 Scorer Tables?

Environment

  • ST-2100
  • ST-2333

Answer/Steps

20161207_145944936_i.jpg 

  1. Disconnect all power and signal connections from the affected table. Remove end padding and un-gang from other tables if applicable.
  2. Using a sturdy push cart, have a helper slide the cart under the table from the front while lifting the side of the table you plan to work on.
  3. Using a 1/2" socket and driver, remove the 4 bolts holding the front caster in place. 
  4. Remove the 4 bolts holding the caster assembly to the display body next.
  5. With the entire caster assembly removed, remove the rear caster bolts and replace the caster.
  6. Re-install the caster assembly starting with the 4 middle bolts.
  7. Replace the front caster and bolts.

KB ID: DD3523922


Fill out my online form.
DISCLAIMER: Use of this content may void the equipment warranty, please read this DISCLAIMER prior to performing any service of the equipment.