RC-50: How to separate for individual control of TI-2025 or TI-2026 timers?

Topic

How do I separate my RC-50 handhelds for individual control of two or more TI-2025 or TI-2026 timers?

Environment

  • TI-2025 or TI-2026 Timers
  • All Sport 100
  • RC-50 wireless handheld

Steps

By default, when TI-2025/TI-2026 timers are shipped out the, RC-50s and the drivers have all dips witches disengaged on the both the driver and wireless handheld.  This means one handheld will control multiple timers by default.  If desiring to use one handheld per timer without interference, the following steps will need to be performed.

  1. Set a unique combination of dipswitch settings on each handheld (e.g. dipswitch 1 ON, everything else off on one handheld and all dipswitches left in the off position on the other); see FLR3-100 Unable to communicate with new remote, Incorrect dip switch settings in key fob, DD2554754 for diagrams.
  2. Open up a Timer by removing the 4 screws that secures the front/back panel.
  3. Near the center of the driver, set the dip switches to match the handheld (e.g. if dip switch 1 is engaged on the handled, engaged dip switch 1 on the driver).

    DD3000468_1.jpg
  4. Power up the timer and verify RC-50 radio handheld is able to control the timer.
  5. Power up other timers and verify each handheld is only controlling one timer.

KB ID: DD3000468


DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.