No Ethernet communication to display, Boot up shows "No Eth"; Bad Cat5 cable

Potential Symptoms

  • "Communication Error!" appearing in the VCS dashboard.
  • Unable to establish Ethernet communication to display.
  • Venus 1500 v3 display turns red and unable to get status.
  • Venus 1500 v4 shows No Response Alert.
  • Boot sequence on display may show "No Eth", "Eth No Link" or "IP: 192.168.240.2"
  • Communication equipment such as Ethernet Bridge Radio client or Fiber Ethernet Media Converter have power but no Ethernet connection.
  • Can communicate when directly connected to the display controller, but not through the communication equipment.
  • A laptop sees a link to the controller when directly plugged into it. It doesn't see a link when connected to the controller using the bad cable.
  • The link through the bad cable may be unsteady - it will be lost once or multiple times a minute even though:
    • The cable is in good condition and not physically being moved or wiggled.
    • Its connections are clean, solid and have been re-seated.

Environment

  • Product: Galaxy, AF-3150, AF-3200, AF-3400, AF-3500, AF-3550, GalaxyPro, GS6
  • Component: Ethernet Communication, M-Series Hardware Bridge, CDMA
  • Control System: Venus Control Suite, Venus 1500 v3 or v4

Cause

  • Bad Ethernet patch cable (Cat5) between the QC (Quick Connect) card and controller.

Resolution

  • Repair or replace the Ethernet patch cable.
    • Note: Contact your Reseller or Daktronics (1-800-325-8766) for replacement options.

KB ID: DD1993587


DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.