Venus Control Suite is not connecting to display, Display has no Internet connection

Potential Symptoms

  • "Communication Error!" appearing in the VCS Dashboard.
  • DMP, VIP or M-Series Hardware bridge (Bridge)  show Offline in Venus Control Suite Dashboard.
  • May occur with a First Time Fire Up (FTFU) or new installation.
  • GUID's for the VIP and DMP are not listed when adding devices in Venus Control Suite (VCS).
  • Display may be getting an IP address from the network but unable to connect in VCS.

Environment

  • Product Family: Message Displays
  • Product: Galaxy, Galaxy Pro, Galaxy Standard 6 (GS6), GT6, M-Series Hardware Bridge
  • Component: Network switch/Router/VLAN (physical connection or configuration)
  • Control System: Venus Control Suite (VCS)

Cause

  • Sign is not connected to a device that is providing Internet access to the display.
    • This could include being connected to an off-network switch, direct connection to the end user's computer, or is simply physically unplugged.
    • This may also include being connected to a switch with incorrect ports configured for the Internet access to the sign equipment.
    • May have an issue with the router that should be providing Internet access that the sign is connected to.
    • Internet provider may have shut off service.
      • May be seen in cases where a tenant moves out of a building and disconnects the Internet service and it happens to have been tied into the sign.   

Resolution

  • Connect sign to network that will provide the display with internet access.

KB ID: DD3280947


DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.